ServicesGutter Installation
Gutter Installation in Walterboro, SC
We install new gutters that are sized to the water your roof actually sheds, pitched so it drains, and fastened so they stay put. Before anything goes up, we walk your home with you and explain each option in plain terms.

When New Gutters Make More Sense Than Repairs
A gutter is a simple channel, but it only works when three things are right: it is big enough for the roof above it, it slopes toward an outlet, and its hangers are anchored into sound wood. When an old system gets one of those wrong along most of its length, patching it costs you more over time than replacing it.
If the trouble is one leaking joint or a single sagging run, our Gutter Repair page covers that work and we will tell you so. Installation is the right call when the metal is rusted through in several places, the gutters were undersized from the start, or the fascia behind them needs attention before anything can hang on it again.
We have been in business 8 years, and most of our work starts with a homeowner who simply wants to know what they are looking at. That is how we approach every visit.
What a Gutter Installation Includes
- Sizing from your roof area
- We measure each roof plane and its pitch, because a steep roof sends water into the gutter faster than a shallow one. That tells us whether a 5-inch or 6-inch K-style gutter fits each run. Lowcountry summer storms can dump a lot of rain in a short burst, so we size for the heavy days, not the average ones.
- Correct pitch on every run
- We snap a chalk line so each gutter falls about a quarter inch for every ten feet toward its outlet. Too little slope leaves standing water that breeds mosquitoes and corrodes metal. Too much looks crooked from the street.
- Hidden hangers into solid wood
- We fasten hidden hangers with screws through the fascia and into the rafter tails where we can reach them, spaced closer together on long runs. Screws hold far better than the old spike-and-ferrule method, which loosens as wood swells and shrinks.
- Sealed corners and end caps
- Miters and end caps are joined and sealed with gutter sealant rated for outdoor metal. These joints are where most leaks start, so we take our time on them.
- Removal and haul-off
- We take down the old gutters and hangers, pull any loose fasteners, and haul the scrap away so nothing is left in your yard.
Signs Your Home Needs New Gutters
Water spilling over the front edge
If rain sheets over the lip during a normal storm, the gutter is either too small for the roof or sloped the wrong way. Both are design problems that repairs rarely fix.
Gutters pulling away from the fascia
A gap between the gutter's back edge and the board behind it means hangers have lost their grip. Water then runs behind the gutter and soaks the fascia.
Rust lines and split seams
Older steel gutters rust from the inside out, often starting where water sits. Once you see orange streaks or pinholes along several runs, the metal is near the end of its life.
Soft or stained fascia
Dark streaks, peeling paint or wood that gives under a screwdriver point to years of overflow. We check this before quoting so it does not become a surprise on install day.
Trenches in your flower beds
Water falling straight off the roof carves a line in the mulch below the eaves. That splash also wets your siding and can push moisture toward the foundation.
What Affects the Cost of New Gutters
Every price we give comes from measurements taken at your home, not a guess over the phone. The total depends mostly on how much gutter you need and how hard it is to reach. Here is what moves it.
Linear footage and corners
Total length sets the material cost. Each inside or outside corner adds a miter that has to be cut and sealed, so a roof with many angles costs more than a simple rectangle of the same length.
Height and access
A single-story ranch is quicker and safer to work on than a two-story home or a run over a steep slope, a deck or dense shrubs. Taller work takes more ladder setup and more time.
Material and size
Aluminum is the common choice and holds up well in humid weather. Moving from 5-inch to 6-inch gutters, or choosing a heavier gauge or a different finish, changes the price.
Condition of the fascia
Sound wood means we hang the new gutters and go. Rotted boards have to be dealt with first, and we show you that before it changes any number.
Adding protection at the same time
Many homeowners add Gutter Guards or Gutter Covers while the new system is going up. Doing both in one visit saves a second setup.
How Installation Day Works
- 1
Free consultation at your home
We walk the roofline with you, measure each run, and point out what we see, including fascia condition and where water is overflowing now. You get a plain explanation of the gutter sizes and materials that fit your roof and why.
- 2
A written estimate you can read
Your free estimate lists linear footage, corners, materials and any fascia concerns as separate lines. If something under the old gutters could change the job, we say so up front.
- 3
Tear-off and inspection
On the day, we remove the old system first and look at the exposed fascia. If we find soft wood, we stop, show you photos, and explain what needs to happen before new gutters go on.
- 4
Hanging and sealing
We set the pitch line, hang the gutters on screwed hangers, cut the outlets, and seal every corner and end cap.
- 5
Water test and cleanup
We run a hose at the high end of each run to confirm water travels to the outlet without pooling or dripping at the joints. Then we pick up scrap and fasteners and walk the finished work with you.

Gutter Installation Questions
Should I choose 5-inch or 6-inch gutters?
It depends on the square footage and pitch of the roof section draining into each run. Most single-story homes do fine with 5-inch, while large or steep roof planes often need 6-inch to keep up in a hard storm. We measure and show you the reasoning for each side of your home.
How long does installation take?
Most homes are finished in a single day, including tear-off and cleanup. Larger two-story homes, many corners, or fascia problems found during removal can stretch it longer, and we will tell you before we start if we expect that.
Do I need to be home during the work?
Not for the whole day, since the work is all outside. We do like to walk the finished gutters with you, so we try to catch you at the start and the end.
Can you put gutter guards on when you install?
Yes. Installing Gutter Guards or Gutter Covers with new gutters is efficient because the hangers and guard can be fitted together. Under pine trees, guards keep needles from packing the trough between storms.
How long have you been installing gutters?
We have been in business 8 years. We also received the Angie's List Super Service Award in 2018, which came from the homeowners we worked for.
Find Out What Your Roofline Needs
We will measure your home, explain the sizes and materials that fit, and give you a written estimate. The consultation is free.