ServicesGutter Covers
Gutter Covers in Walterboro
A gutter cover is a solid hood over the whole gutter. Rain follows its curved nose into the trough while leaves and pine needles slide off the edge. We explain how each style works on your roof, then fit the one that suits your pitch, trees and gutter size.

What a gutter cover is, and when it makes sense
A gutter cover closes off the top of the gutter. Most use a reverse curve: water clings to the rounded front edge by surface tension, wraps around it and drops through a narrow slot into the trough. Leaves and needles are too light to follow that curve, so they fall to the ground. Gutter guards work differently. They are screens or mesh inserts that let water pass through holes in a flat or angled surface.
Covers are a good choice when pines or live oaks drop small debris that packs into mesh, or when you are tired of climbing a ladder after every storm. They are a weaker fit on very steep roofs, or where a roof valley dumps a heavy sheet of water onto one short run, because fast water can shoot past the nose. We tell you which case your home falls into before you spend anything.
We have been in business 8 years, and a big part of every first visit is simply showing you where water and debris actually come off your roof.
What our gutter cover work includes
- A gutter check before anything goes on top
- We look at hangers, slope and seams first. A cover on a sagging or leaking gutter only hides the problem. If the gutter needs work, we say so and point you to gutter repair before covers go on.
- A cover style matched to your roof
- We compare reverse-curve hoods with other solid profiles against your roof pitch, shingle type and the trees around the house. You hear the tradeoff of each in plain terms, including where a gutter guard might serve you better.
- Fastening that stays put in wind
- Depending on the product, covers clip to the gutter's front lip and tuck under the drip edge or the first course of shingles. We secure them so wind cannot lift them, without driving fasteners through the shingle field where they could let water in.
- Mitered corners and end caps
- Inside and outside corners are where covers most often fail. We cut and fit each miter so the curve stays continuous and water does not jump the joint.
- Cleanup and a walk-around
- We pick up offcuts, old fasteners and debris from the trough. Then we walk the house with you and run a hose so you can watch the cover shed water.
Signs gutter covers could help your home
Needles matted on mesh guards
Pine needles weave into screens and sit on top like a mat, so rain runs right over. A solid cover gives them nothing to catch on.
Overflow in hard afternoon storms
If water spills over the front during summer thunderstorms even though the gutter is sized right, packed debris inside is likely cutting its capacity.
Seedlings growing in the trough
Wet leaves break down into soil, and seeds sprout in it. By then the gutter holds standing water and extra weight on every hanger.
Soft or stained fascia boards
Water that backs up behind a clog soaks the fascia and the edge of the roof deck. Paint peeling along the roofline is often the first clue.
Ladder trips you would rather stop making
Climbing to clear gutters several times a year is a real fall risk. Covers cut how often anyone needs to be up there.
What moves the cost of gutter covers
We price covers per job after measuring, not from a chart. Two houses with the same footage can differ a lot once corners and roof shape are counted. Every line on your estimate comes with a reason.
Footage and number of stories
Longer runs take more material. Second-story gutters take more setup and ladder work, which adds labor time.
Corners, valleys and dormers
Each corner needs a hand-cut miter, and complex rooflines mean more of them. Runs under valleys may need a heavier-duty profile.
Cover material and finish
Aluminum gauge and finish color change the material cost. Thicker stock resists denting from falling limbs better.
Condition of the gutter underneath
Loose hangers, failed seams or a bad slope must be fixed first. If the gutter is past saving, new gutter installation may make more sense than covering old metal.
Access around the house
Dense shrubs, a steep pitch or a tight side yard slow setup. We plan for it up front so it shows on the estimate, not afterward.
How a gutter cover job runs
- 1
A phone call and a free consultation
You tell us about the house and the trees nearby, and we set a time to come look. The consultation and estimate cost you nothing.
- 2
Measuring on site
We measure every run, count corners, check roof pitch with a gauge and note hanger spacing. We also mark spots where valleys concentrate water, since those runs need the most attention.
- 3
A written estimate you can follow
Each line is spelled out: cover type, footage, corners and any repair needed first. We explain why we recommend each item so you can compare options on your own terms.
- 4
Install day
We empty the trough, tighten or replace loose hangers, then fit covers run by run and miter the corners. Before we leave, we test each section with a hose.

Gutter cover questions we hear
What is the difference between gutter covers and gutter guards?
A cover is a solid hood that relies on a curved edge to pull water in and push debris off. A guard is a screen or mesh that lets water drop through holes. Covers handle fine needles better, while guards often take more water in very heavy rain. We can show you both on your own gutters.
Will covers keep up with heavy summer downpours?
A well-fitted reverse-curve cover handles most storms. In the hardest bursts, water coming off a steep section or a valley can overshoot the nose. We find those runs during the measuring visit and tell you what we would do about them.
Will I ever need to touch my gutters again?
Much less often, but not never. Pollen, shingle grit and fine dust can still collect in the trough over time. Most covers can be lifted at the front to reach inside when that happens.
Can covers go on the gutters I already have?
Yes, as long as the gutters are sound and properly sloped. If hangers are pulling loose or seams leak, we fix that first. If the gutters are too far gone, we will tell you honestly and explain your gutter installation options.
Has your work been recognized by customers?
We received the Angie's List Super Service Award 2018, which came from homeowners rating the work we did for them. We would rather you judge us on the visit, though. Ask us anything while we are measuring.
Find out which cover fits your roof
We will look at your gutters, roof pitch and trees, then explain each option and what it means for your home. The consultation is free.